|Height||3-1/2″ (89 mm)|
|Width||2-9/16″ (65 mm)|
|Shipping Weight||2 lb (907g)|
STANDARD REVERSIBLE PIVOT PIN
Each hing contains a reversible pivot pin. One side of the pin is marked 90 degrees. The opposite side is marked 85 degrees. Standard hinges come with the 90-degree side activated. The pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN
Custom pivot pins are available to accommodate “off-angle” installations. If the 5-degree reversible pivot pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a custom pivot pin (up to 45 degrees). If using the custom pivot pin, contact us. Your glass sizes and the aesthetics of the enclosure may be affected by the custom pivot pin.
USING TWO HINGES
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28″ (711 mm).
USING THREE HINGES
Using three hinges with 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32″ (813 mm).
Glass Thickness: 5/16″ (8 mm) to 1/2″ (12 mm) Tempered Safety Glass
Construction: Solid Brass
Hinge Swings: 90º in and 90º Out
Closing Type: Self-centering when within 15º of closed position
Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Gasket Pack must be purchased separately for use with 5/16″ (8 mm) thick tempered glass.