TECHNICAL SPECIFICATIONS
Height | 3-1/2″ (89 mm) |
---|---|
Width | 2-3/16″ (56 mm) |
Shipping Weight | 2 lb (907g) |
Standard Reversible Pivot Pin
Each hinge contains a reversible pivot pin. One side of the pin is marked at 90 degrees. The opposite side of the pin is marked 85 degrees. Standard hinges come with the 90-degree side activated. The pin can be rotated (not flipped upside down) to activate the other side.
Custom Pivot Pin
Custom pivot pins are available to accommodate “off-angle” installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5-degree pivot pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a custom pivot pin (up to 45 degrees).
Using two hinges
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28″ (711 mm).
Using three hinges
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32″ (813 mm).
SPECIFICATIONS:
Glass Thickness: 5/16″ to 1/2″ (8 to 12 mm) Tempered Safety Glass
Construction: Solid Brass
Hinge Swings: 90 degrees in and 90 degrees out
Closing Type: Self-Centering when within 15 degrees of closed position
Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Gasket Pack must be purchased separately for use with 5/16″ (8 mm) thick tempered glass.