Select Fencing System.

Frameless Glass Railing with Stainless Steel Spigots

Frameless Glass Railing with Aluminum Poles

Frameless Glass Railing Standoff System

Select Railing Shape

Inline

In the inline section, there is only a single side shape.

L Shape

In the L shape section, there are two sides in form of L shape.

U Shape

In the U shape section, there are three sides align to each other.

Enclosed

In the enclosed shape section, there are four sides align with each other.

Stair

In the Stair section, there are one and two sides Railing.

Project Variables

Hardware
304 Stainless Steel (Ideal for Interior Applications)
316 Stainless Steel (Ideal for Exterior Applications - Corrosion-resistant Alloy)
2205 Stainless Steel (Ideal for Coastal Applications, and Harsh Climate - Superior Corrosion-resistant Alloy)
304 Matte Black
316 Matte Black (Ideal for both Interior and Exterior Applications - Corrosion-resistant Alloy and Powder Coated Paint)

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

2205 Stainless Steel (Ideal for Coastal Applications, and Harsh Climate - Superior Corrosion-resistant Alloy):

Best stainless steel quality on the market. Duplex 2205 stainless steel, marine grade, anti corrosion....

Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

*Not available in matte black

Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

304 Stainless Steel (Ideal for Interior Applications):

Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel. It contains... high nickel content that is typically between 8 and 10.5 percent by weight and a high amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements include manganese, silicon, and carbon. The remainder of the chemical composition is primarily iron.

The high amounts of chromium and nickel give 304 stainless steel excellent corrosion resistance. Common applications of 304 stainless steel include:

  • Commercial food processing equipment
  • Fasteners
  • Piping
  • Heat exchangers
  • Structures in environments that would corrode standard carbon steel.
  • Appliances such as refrigerators and dishwashers
Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

316 Stainless Steel (Ideal for Exterior Applications - Corrosion-resistant Alloy):

Similar to 304, Grade 316 stainless steel has high amounts of chromium and nickel. 316 also contains silicon,... manganese, and carbon, with the majority of the composition being iron. A major difference between 304 and 316 stainless steel is the chemical composition, with 316 containing a significant amount of molybdenum; typically 2 to 3 percent by weight vs only trace amounts found in 304. The higher molybdenum content results in grade 316 possessing increased corrosion resistance.

316 stainless steel is often considered one of the most suitable choices when selecting an austenitic stainless steel for marine applications. Other common applications of 316 stainless steel include:

  • Chemical processing and storage equipment
  • Refinery equipment
  • Medical devices
  • Marine environments, especially those with chlorides present
Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

304 Matte Black:

Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel. It contains... high nickel content that is typically between 8 and 10.5 percent by weight and a high amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements include manganese, silicon, and carbon. The remainder of the chemical composition is primarily iron.

The high amounts of chromium and nickel give 304 stainless steel excellent corrosion resistance. Common applications of 304 stainless steel include:

  • Commercial food processing equipment
  • Fasteners
  • Piping
  • Heat exchangers
  • Structures in environments that would corrode standard carbon steel.
  • Appliances such as refrigerators and dishwashers
Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

316 Matte Black (Ideal for both Interior and Exterior Applications - Corrosion-resistant Alloy and Powder Coated Paint) :

Similar to 304, Grade 316 stainless steel has high amounts of chromium and nickel. 316 also contains silicon,... manganese, and carbon, with the majority of the composition being iron. A major difference between 304 and 316 stainless steel is the chemical composition, with 316 containing a significant amount of molybdenum; typically 2 to 3 percent by weight vs only trace amounts found in 304. The higher molybdenum content results in grade 316 possessing increased corrosion resistance.

316 stainless steel is often considered one of the most suitable choices when selecting an austenitic stainless steel for marine applications. Other common applications of 316 stainless steel include:

  • Chemical processing and storage equipment
  • Refinery equipment
  • Medical devices
  • Marine environments, especially those with chlorides present
Read more
Railing Height
36 Inches
42 Inches
48 Inches

36 Inches

Minimum Height of 900mm (36 in.) in residential applications. If the surface is over 180 cm (6 ft.) from the finished floor, the guardrail must be at least 1070 mm (42 in.) high.

42 Inches

Minimum Height of 1070mm (42 in.) in commercial applications. For residential applications, if the surface is over 180 cm (6 ft.) from the finished floor, the guardrail must be at least 1070 mm (42 in.) high.

48 Inches

Any outdoor basin of water must be surrounded by an enclosure restricting access to it. The enclosure must be at least 1.2 metres (4 ft.) high at all points.
*In rare occasions, municipalities may require (5 ft.) high enclosures.

Specify Spans & Gates For Inline

Total Cost: $1135.00

Spans & Gates

Spacing between Glass Panels: 1 inch
End Spacing if 90 Degree Corner: 3/4 inch

  • 48.78 in
    panel
  • 48.78 in
    panel

Measurements Details


Master range

Glass
Wall

Specify Spans & Gates For Inline

Total Cost: $1333.33>

Span Length: Total Length (i.e. Multiple Panels)

  • 45.62 in
    panel
  • 45.62 in
    panel
  • 45.62 in
    panel
  • 45.62 in
    panel

Measurements Details

10mm Clear Glass

Master range

Specify Spans & Gates For Inline

Total Cost: $1583.33

Span Length: Total Length (i.e. Multiple Panels)

  • 49.06 in
    panel
  • 49.06 in
    panel
  • 49.06 in
    panel
  • 49.06 in
    panel

Measurements Details

12mm Clear Glass

Specify Spans & Stair For Inline

Total Cost: $230.00

Span Length: Total Length (i.e. Multiple Panels)

Measurements Details

12mm Clear Glass

Specify Spans & Stair For Inline

Total Cost: $1666.66

Span Length: Total Length (i.e. Multiple Panels)

Measurements Details

10mm Clear Glass

Specify Spans & Stair For Stair

Total Cost: $230.00

Span Length: Total Length (i.e. Multiple Panels)

Measurements Details

12mm Clear Glass

Specify Spans & Stair For Stair

Total Cost: $230.00

Span Length: Total Length (i.e. Multiple Panels)

Measurements Details

12mm Clear Glass

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots
Loading...
Click on the image for Zoom Graph

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots
Loading...
Click on the image for Zoom Graph

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots
Loading...
Click on the image for Zoom Graph

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Measurement

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.