GS Pivot Hinge

GS Pivot Hinge

$47.50

The GS Pivot Hinge offers a versatile range of applications, accommodating 5/16″ to 1/2″ (8 to 12 mm) tempered safety glass. This high-end hinge provides several benefits, such as carrying most of the weight on the bottom hinge, thus preventing the glass from sagging overtime. These self-centering hinges come with four springs that offer maximum retention strength. 

The GS Pivot Hinge is also adaptable to our Shower Header Kit (S-HK) for shower enclosures that do not extend all the way up to the ceiling.

The Pivot Adaptor Block for Header Kit (S-HK-AD) is sold as part of the header kit (S-HK) 

The hinge comes pre-configured with the 90-degree side activated as the default setting. This means that when the self-centering spring is engaged, the door will stop in a closed position and form a straight line (also known as 90° or 0°).  

However, the pin can be rotated to activate the other side (85°), which would cause the door to stop in a closed position that is 5° past a straight line. It’s important to note that the pin should not be turned upside down. The 85-degree side of the pivot pin is typically activated to achieve a tighter seal with certain types of shower gasket.

Using two hinges

With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 100 lbs (45 kg) with a maximum door width of 32″ (813 mm).

Includes

Gaskets for all glass thickness, screws, wall plastic anchors.

Note that glass fabrication is required to accommodate the hinge.

Our shower hardware finishing process includes three different applied methods, each resulting in a durable, corrosion-resistant, and visually appealing finish. These methods include electrophoresis (Matte Black), chrome plating (chrome), and nickel plating (Brushed Nickel). Regardless of the chosen option, our hardware finish process guarantees a beautiful, long-lasting finish that meets the highest industry standards for quality and durability, providing exceptional performance and visual appeal.

TECHNICAL SPECIFICATIONS

Safety Glass Thickness 5/16” (8 mm) to 1/2” (12 mm)
Color/Finish Chrome, Brushed Nickel, Matte Black
Durability-Lifespan Test 50000 cycles open/close*
Manufacturing Material Solid Brass
Swing Type 90° in and 90° Out
Closing Type Self-Centering within 15 degrees of Closed Position

*The term “50000 cycles open/close” is a test commonly used to measure the durability and lifespan of door hinges. It means that the hinge has been tested to withstand opening and closing the door 50,000 times without failing or showing signs of wear and tear. 

Finish

  • Brushed Nickel
  • Chrome
  • Matte Black
Categories:
    • S-IK-TVETW-Product-Image-1.webp
      Translucent Vinyl Edge T-Fin
      $15.00 View product
    • S-SB-WM45CH-Product-Image.webp
      45° Wall Mount Support Bar

      Brushed Nickel, Chrome, Matte Black

      $97.50 View product
    • S-HD-KNBN-Product-Image.webp
      Easy Grip Door Knob Back to Back Mounted

      Brushed Nickel, Chrome, Matte Black

      $36.00 View product
    • S-IK-10DS-Product-Image-2.webp
      Door Sweep with Double Soft Fins and Deflector for 3/8″ or 1/2″ Glass
      $9.50 View product
    • S-HI-GG135CH-Product-Image.webp
      GS 135° Glass to Glass Square Hinge

      Brushed Nickel, Chrome, Matte Black

      $74.00 View product
    • S-HI-GG180CH-Product-Image.webp
      GS 180° Glass to Glass Square Hinge

      Brushed Nickel, Chrome, Matte Black

      $72.00 View product
  • GS Pivot Hinge
  • Weight 5 kg
    Dimensions 10 × 8 × 5 cm
    Finish

    Brushed Nickel, Chrome, Matte Black